柴油发电机组冷却液柴油发电机组在运行过程温度会逐渐上升，特别是炎热的夏天。高温环境下，很容易影响柴油发电机组的工作效率，并且会引起部分故障问题。所以，我们需要给柴油发电机组加冷却液，那么柴油发电机组的冷却液怎么加？柴油发电机组技术带你了解一下。

添加柴油发电机组冷却液必须将柴油发电机组停机且完全冷却之后。我们在加冷却液的时候，冷却液液面应该达到水口焊接面下5cm处。

有些机组有刻度线，只要达到指示刻度线即可。当我们将冷却液加满后，启动预热柴油发电机组，同时检查冷却液面，查看是否需要补充冷却液。冷却液应每两年或4500小时更换一次。

这样做一是避免因冷却系统内有沉淀而降低冷却性能；

二是因冷却液长时间未更换时，锈迹会降低冷却液的有效性能及使水温传感器失效。更换冷却液时，系统应先用清水冲洗，清洗时一定要等冲出的水很干净时才行。以上是柴油发电机组的冷却液怎么加？如果还是不太了解怎么加冷却液，可以咨询柴油发电机组厂家，在厂家技术人员指导下操作。

Diesel generator set coolant: The temperature of the diesel generator set will gradually rise during operation, especially in hot summer. Under high temperature conditions, it is easy to affect the efficiency of diesel generator sets and may cause some malfunctions. So, we need to add coolant to the diesel generator set. So, how do we add coolant to the diesel generator set? Let me introduce you to the technology of diesel generator sets.

Adding coolant to the diesel generator set must be done after the diesel generator set has been shut down and completely cooled down. When adding coolant, the coolant level should reach 5cm below the welding surface of the water nozzle.

Some units have scale lines, as long as they reach the indicated scale line. After filling up the coolant, start the preheating diesel generator set and check the coolant level to see if it needs to be replenished. The coolant should be replaced every two years or 4500 hours.

This is done to avoid a decrease in cooling performance due to sedimentation in the cooling system;

The second reason is that when the coolant is not replaced for a long time, rust will reduce the effective performance of the coolant and cause the water temperature sensor to fail. When replacing the coolant, the system should be rinsed with clean water first. When cleaning, be sure to wait until the water flushed out is very clean. How to add the coolant for the diesel generator set? If you still don't know how to add coolant, you can consult the diesel generator manufacturer and operate under the guidance of their technical personnel.